AAC BLOCK MACHINES
AAC Block Manufacturing Unit
- 50 CM – expandable up to 100 CM
- 100 CM – expandable up to 200 CM
- 300 CM – expandable up to 500 CM-
Pouring & mixing machine is the main equipments in Workshop section of batching pouring covering by The AAC production line.
Tilting crane turns the block (with mould and side plate) by 90 degrees in air, then hanging on cutting platform or cutting car, to de-mould and cut.
This device have simple structure, suitable operation good quality & easy to maintain. Grouping crane transfer cake, steam trolley, side plate at proper requires position without damaging cake
When the slurry is poured into mould, it will be subject to pre-curing with the occurrence of foaming then the “cake” ready for subsequent cutting will be available.
Side plate is the tool that matched with mould box for pouring & pre-curing process.
The Steam trolley is the tool carrying the mould box side plates as well as the block body out of the autoclave.
Cutting machine is the key equipment in the AAC Production line, the working Principle is the tiling hanger turns the mould 90 degrees in the air, open the mould and takes block onto the cutting cart together with the side plate.
Autoclave is the Pressure Vessel and Key equipment in the production of Aerated Concrete and Autoclaved Brick. It is applicable for curing the cut body or brick under High Temperature and High Pressure. The working medium is Saturated Water Vapor.
Annual Output - 15000 Metric Cube to 200000 Metric Cube